Underfloor heating is changing into increasingly popular. In Scandinavia, around eighty per cent of houses are warmed utilizing this type of heating system, and coverage in the UK can be rising quickly.
In consequence more electricians will be tasked with installing electric underfloor heating. While this may be daunting if it is something you have by no means done earlier than, the set up process is fairly straightforward.
The following tips will provide help to install the heating system
Check the sub-floor
Before putting in any sort of underfloor heating system, it’s best to check the type of sub-floor the system is to lie on top of.
If there is a concrete sub-floor, you will must put insulation board in place, before you lay the heating system.
Without the insulation board, the cold concrete will be heated first, which can dramatically have an effect on the output of the system.
If there is a timber sub-floor, there will not be the identical sort of affect, however chances are you’ll wish to put tile backer board in place, earlier than laying the heating system.
Guaranteeing the sub-floor is insulated will help your underfloor heating system work at maximum efficiency.
Select the system
There are various types of underfloor heating available, and the one that is finest for you will depend upon many factors. These embody the sub-floor, the floor covering and easily personal preference.
You could need to set up an in-screed cable. This is typically put in in new-build properties or extensions, as it housed within the screed – an integral part of the floor.
Of course, this option just isn’t practical in case you are putting in the heating system under an current floor.
In this case, you could need to use a heating mat or a versatile element.
A heating mat is the perfect choice when you have tile, stone of slate flooring. It heats up very quickly and the heat transference to these supplies is high.
If in case you have laminate or timber flooring, you might need to consider a versatile heating element. This is very thin and can be laid directly under the flooring, without elevating the floor.
While laying the underfloor heating system is fairly simple and could be accomplished by anyone with some DIY expertise, the ultimate connection should be carried out by a certified electrician.
They will even be able to approve the installation and, if required, test the system.
Once put in, electric underfloor heating needs very little maintenance. There aren’t any moving parts to corrode – so you need to anticipate a lifespan of between 15 and 30 years.
Should you have just about any issues concerning where and tips on how to utilize mata grzewcza pod płytki, you can call us in our web site.