Underfloor heating is turning into increasingly popular. In Scandinavia, round eighty per cent of homes are warmed utilizing this type of heating system, and coverage in the UK is also rising quickly.
In consequence more electricians will be tasked with putting in electric underfloor heating. While this may be daunting if it is something you might have never executed before, the set up process is fairly straightforward.
The following pointers will help you install the heating system
Check the sub-floor
Earlier than putting in any type of underfloor heating system, it is best to check the type of sub-floor the system is to lie on top of.
If there’s a concrete sub-floor, you will need to put insulation board in place, earlier than you lay the heating system.
Without the insulation board, the cold concrete will be heated first, which can dramatically have an effect on the output of the system.
If there’s a timber sub-floor, there will not be the identical sort of affect, however you might need to put tile backer board in place, before laying the heating system.
Ensuring the sub-floor is insulated will assist your underfloor heating system work at maximum efficiency.
Select the system
There are various types of underfloor heating available, and the one that is finest for you will rely upon many factors. These embrace the sub-floor, the floor covering and easily personal preference.
Chances are you’ll want to set up an in-screed cable. This is typically installed in new-build properties or extensions, as it housed within the screed – an integral part of the floor.
After all, this option shouldn’t be practical if you are installing the heating system under an current floor.
In this case, you might wish to use a heating mat or a flexible element.
A heating mat is the ideal alternative you probably have tile, stone of slate flooring. It heats up very quickly and the heat transference to those materials is high.
In case you have laminate or timber flooring, it’s possible you’ll wish to consider a flexible heating element. This may be very thin and will be laid directly under the flooring, without raising the floor.
Installation
While laying the underfloor heating system is fairly simple and could be accomplished by anyone with some DIY experience, the ultimate connection ought to be carried out by a professional electrician.
They will also be able to approve the installation and, if required, test the system.
Upkeep
As soon as put in, electric underfloor heating wants very little maintenance. There are not any moving parts to corrode – so you must count on a lifespan of between 15 and 30 years.
If you treasured this article so you would like to acquire more info about mata grzewcza pod panele please visit our own page.